REINFORM
A Team Layer With Shirt Construction
Custom Equestrian Team Overshirt Development
Custom equestrian team overshirt developed through OEM/ODM sampling: define the olive shell, six-button front, open chest pockets and unlined finish.
PUBLICATION /
CONTENT REVIEW /
A development direction for your brand. Final material, construction and performance by specification and sample approval.START WITH
THE RIDER.
For equestrian apparel brands, clubs or teamwear buyers developing a relaxed outer shirt layer that needs a clear distinction from a lined competition blazer, a show shirt or a hooded team layer.
Product development context
This custom overshirt proposal is a relaxed, long-sleeve equestrian team layer worn open or closed over a named navy crew-neck underlayer. Its design is deliberately shirt-led: a folded shirt collar, a full front placket with six visible front buttons, two open-top rectangular chest patch pockets without flaps and shirt cuffs with one button each. The body is unlined; it has no blazer lapel, hood or zip. These details define a sample-development brief, not an existing approved production style or a claim of tested performance. REINFORM has operated its own factory since 2016. MOQ is 300 pieces per style per colour. Sampling takes 7–10 working days from the agreed start. Bulk production takes 30–45 working days after sample approval, confirmation of the specification, materials and order details, and agreement of the production start date. Sample revisions and shipping are planned separately. OEM or ODM scope and construction feasibility remain subject to project review and buyer approval.
Keep the shirt silhouette clear
Use a folded shirt collar and full button placket rather than a notch lapel or blazer front. Confirm the relaxed body ease and finished length against the intended underlayer.
Make the pocket brief explicit
Specify two rectangular chest patch pockets with open tops and no flaps. Record width, height, placement and top-edge finish, then check that both sit level on the sample.
Review the reverse without a lining
The brief calls for an unlined body. Inspect the inside reverse, seam finishing and placket support on the sample; do not assume a particular fusible, seam binding or internal construction before materials are reviewed.
THE FABRIC
SETS THE FEEL.
Compare material directions against your rider, climate and care expectations. Request the actual fabric specification and evidence for any performance claim.
| Material direction | Why consider it | What to verify |
|---|---|---|
| Muted olive shell direction | A woven shell direction gives the overshirt a clear outer-shirt identity over the navy crew-neck layer. Fibre content, weight, stretch, finish and exact shade remain open until sourcing and buyer review. | Review supplier composition and construction details, approve a physical shade reference and assess the complete sample over the named underlayer. No fixed fibre or GSM is assumed. |
| Local placket-support direction | A support layer may be considered at the front placket so the button line can be reviewed against the selected shell. The support type and extent are not predetermined. | Compare the placket on a sample after the shell and support are selected; inspect button alignment, hand feel, show-through and recovery. Confirm compatibility before freezing the specification. |
| Unlined reverse and seam-finish direction | Without a separate lining, the inside reverse and seam finishes remain visible when the shirt is worn open. The finish must be chosen for the actual shell and buyer’s cost and appearance priorities. | Photograph and approve inside seam finishes, placket reverse, patch-pocket attachment edges and cuff interior on the complete sample; document any agreed changes before bulk planning. |
These are sourcing comparisons, not a list of stocked or certified fabrics. Confirm composition, weight, finish, availability and testing with the material selected for your project.
Proposed unlined team overshirt direction; shell, placket support and seam finish require sample and material review.IT’S IN
THE DETAILS.
Folded shirt collar and full front
Develop a folded shirt collar and full button placket with six visible front buttons. Confirm the button size, spacing, buttonhole direction and front overlap from the buyer’s sketch; do not substitute a zip or blazer lapel.
Two open chest patch pockets
Place exactly two open-top rectangular patch pockets on the chest, with no flaps. Specify dimensions and position from the centre front, shoulder and chest reference points, then check symmetry and opening stability.
Long sleeves with shirt cuffs
Use long sleeves finished with a shirt cuff and one button on each cuff. Set cuff width and closure overlap to the buyer’s wrist and layering preference; confirm button placement on the sample.
Unlined body
Keep the body unlined and review the inside reverse as part of approval. The sample should make the selected seam finish and any local placket support visible for review; no fixed support material or sewing method is claimed.
FROM THE BRIEF.
INTO THE WORKROOM.
Develop the six-button overshirt over the named navy crew-neck layer. Review its two open chest pockets, one-button cuffs and unlined reverse together; the component illustrations do not fix a shell or support material.
Explore our factory
Folded shirt collar and full front
Develop a folded shirt collar and full button placket with six visible front buttons. Confirm the button size, spacing, buttonhole direction and front overlap from the buyer’s sketch; do not substitute a zip or blazer lapel.
Carry this into approval Factory views show our working environment. Your garment follows its agreed specification and sample.GET THE
RIGHT FIT.
A size label is only the beginning. Agree the measurement method, review the garment in use and keep the approved fit record with your specification.
Your fit-session checklist
Record the size worn, body measurements, intended underlayers and every proposed correction with the dated sample.
Note the size worn, body measurements, intended underlayers and each proposed correction. Recheck the affected measurement after a revision; confirm the size breakdown for each style and colour before bulk.
MAKE IT
RECOGNISABLY YOURS.
Use the product’s construction to guide decoration and finishing. Ask for placement, colour and material approval on the relevant sample.
Small details.
One identity.
Folded edges · fine weave
Textured stock · cord attachment
Raised edge · stitched placement
Material mockups with a live wordmark study. Print, weave, colour matching and placement are confirmed on your physical sample.
Shell and colour
Set the target muted olive shade, preferred shell direction and any buyer-supplied material requirements for sourcing review.
Placket and buttons
Provide six-button spacing, button size and colour, front overlap and buttonhole direction; approve the physical trim with the chosen shell.
Pocket dimensions
Mark the two open-top rectangular pockets by width, height, placement and top-edge construction; the proposed design has no pocket flaps.
Cuff and inside finish
Specify cuff width and closure preference, then review the unlined reverse and seam finish. Any local support layer should be selected after sample evaluation.
APPROVE THE DETAIL.
THEN THE ORDER.
The first sample helps you make decisions. Define review conditions and acceptance criteria before you compare the result.
Review the equestrian team overshirt sample
Sampling takes 7–10 working days from the agreed start. Record each decision against the dated sample before bulk approval.
Rider, material direction, measurements and artwork.
DEFINE THE STARTTurn the agreed direction into a garment to review.
7–10 WORKING DAYSReview fit, finish and changes. Confirm the final specification.
REVISE IF NEEDEDProceed with agreed quantities, colours, labels and packing.
30–45 WORKING DAYSA shared development direction
Bring reference garments, your rider profile, target colours and any artwork. We turn these into the measurements, materials and construction questions that the sample needs to resolve.
Sample feedback can return to development. Revisions and transit are planned separately; timing begins from the agreed specification and start date.
KEEP THE APPROVAL.
WITH THE ORDER.
One agreed reference for the workroom: the dated sample, its specification and your confirmed order breakdown.
Sample decisions
- Layered silhouette
Try the sample over the named navy crew-neck layer, both open and buttoned. Record shoulder, chest, sleeve and hem ease against the dated measurement specification.
- Button-front alignment
Count six visible buttons, inspect spacing and buttonholes, and check the placket lays flat through opening and closing.
- Pocket symmetry
Measure both open-top patch pockets from agreed body landmarks; inspect level, shape, top opening and stitching on the front and reverse.
Style, colour & size allocation
Confirm each style and colour separately, with the size allocation attached. The minimum is 300 pieces per style, per colour.
Labels, packing & timing
Agree label artwork, packing instructions and the production start. Bulk production takes 30–45 working days from the confirmed start; revisions and transit are planned separately.
A CLEARER BRIEF.
A MORE USEFUL QUOTE.
Price follows an agreed product, quantity and delivery scope. Use these inputs to compare proposals on the same basis.
Shell and colour availability
The selected woven construction, shade, supplier minimums and any requested material evidence affect sourcing cost and lead time.
Front and pocket details
Button and buttonhole choices, placket support, pocket dimensions and seam finishing change components and sewing operations.
Size and ease matrix
A broader size range or different layering ease can require additional pattern work and sample iterations.
Quantity per style and colour
MOQ is 300 pieces per style per colour. Confirm size ratios, colour split and material feasibility before the production plan is agreed.
Bring these six things
Planning baseline: 300 pieces minimum per style, per colour. Sampling takes 7–10 working days; bulk production takes 30–45 working days from the agreed start.
300 pieces minimum per style, per colour. State each colour quantity separately; confirm your proposed size allocation.
GOOD QUESTIONS.
BETTER DECISIONS.
Product-specific sourcing questions to resolve before sampling.
How is this overshirt different from a competition show jacket?
This proposal has a folded shirt collar, full six-button shirt front, two open chest patch pockets and an unlined body. It does not include a blazer notch lapel, lining or rear vent.
Is the overshirt lined?
No. The sample brief is for an unlined body, so the inside reverse and seam finishes need their own approval. The exact finish and any local placket support remain material and feasibility decisions.
Are the shell fibre and weight already fixed?
No. The muted olive woven shell is a design direction only. Fibre content, weight, finish and shade standard should be agreed after sourcing review and sample evaluation.
